Ventilation

C-RANGE CENTRIFUGAL EXTRACTOR FAN

* Industrial centrifugal extractor fan for ducted or oem installation. * Single phase and three phase models available. * Speed regulated by optional speed controller. * All units have IP55 protection. * Fan is easily removed for cleaning and maintenance, even when the unit is installed. * Units are suitable for extracting dust free, acid free and non – corrosive air. * Asynchronous, self-ventilating, ball-bearing-mounted induction motor. * Protected by black epoxy-polyester paint, the frame is easily removed for cleaning and maintenance. Specially designed for silent operation. §Not suitable for speed control. §Galvanized steel fan with forward-curved blades for high performance. §Epoxy-resin painted steel sheet-metal frame with spiral housing, provided with holes to allow the motor to be fitted in any one of eight different positions in respect to the outlet port.

Punto Filo Slimeline Axial Fans

Performance   HCS models. The unit turns on

Technical Data  ■ The front grille of just 17 mm and the roundness of the four sides make the appliance “virtually” invisible. The design of a special miniaturized Timer has made it possible to keep the grille ultra-slim for these versions too. ■ 4 diameters ∅ 90-100-120-150, standard, timer, long life versions      ■ Data and performances IMQ Performance certified. ■ Extremely easy: installation and maintenance greatly facilitated. Fitted with just 1 screw, supplied. ■ Virtually silent: The styling was performed in parallel with a highly advanced aeraulic design that was accomplished by making a new impeller that permits very limited noise levels with high performance.   Performance   HCS models. The unit turns on when relative humidity exceeds 65% and it turns off when the relative humidity drops below 65%. When the light is switched off, the unit will continue to run from 3 to 20 minutes depending on the timer setting.   ■ Integral backdraught shutter: already installed on the appliance, it prevents unwanted air from getting back in when the appliance is switched off. ■ IPX4 splashproof protection on all models. ■ Conforms to the following standards: CEI EN 60335-2-80 (part 2: Particular requirements for fan), CEI EN 60529 (code IP) and CEI107-53/1986. ■ Eco-Friendly: It guarantees a low environmental impact. Recyclable materials have been used and the “Design for Disassembly” technique has been followed (2002/96/EC-WEE)

Product Description   Ultra Slim Grille of 17mm Attractive Design Suitable for wall and ceiling installation Not suitable for ducting up to roof tile vents. Not suitable for flat ducting. IPX4 splash proof protection on all models. If installing in ceiling need additional gasket to maintain IPX4 protection. The standard models can be speed regulated. Timer models are adjustable from 3 to 20 minutes. HCS Models turn the fan on when relative humidity exceeds 65%. This is factory set and cannot be adjusted. High airflow rate, low operating noise level and low power consumption due to the wing profile blade and motor support. Available option of automatic shutters, timer, pull cord, humidistat and PIR. DUCT TO USE: Suitable for use with 150mm diameter ducting – up to 4 metres (no more than two 90 degree bends).  Flexible aluminum and flexible insulated aluminum ducting available – see Accessories section    GRILLES: Several colours of grille available, see below and Accessories section.

Ariett Habitat

___________________ ■ Two models. Habitat 15/30 can be used to provide trickle

Technical Data ■ For continuous ventilation, with boost facility. Ideal for use in public sector housing in bathrooms, showers, utilities and toilets. ■ Two models. Habitat 15/30 can be used to provide trickle ventilation for rooms housing open-fluid combustion appliances. ■ Motor with shielded poles and ball bearings (30,000 h guaranteed continuous operation) with thermal protection. ■ Two speed motor. ■ Data and performances IMQ Performance certified. ■ Complies with the CEI EN 60335-2- 80 standards and IPX4 splashproof protection, CEI EN 60529 (Code IP _____________________________ Performance ■ Low power consumption. ■ Fully comply with F1 Building Regulations, plus 1.9D alternative approaches. ■ Antivibration support gasket, used for mounting on tiled or uneven walls. ■ Backdraught-shutter to avoid back flow when unit is turned off. Available only for model 15/30. ■ 100 mm dia. outlet spigot. ■ Complete with fixings. Design: F. Trabucco – M. Vecchi Accessories (description and data on page 99) Wiring diagrams shown on page XXVII.

Product Description Continuous running in accordance with ADF System 3. Trickle and Boost speeds. Two speeds. Contains integral backdraught shutter. Long Life ball bearing motors which are guaranteed for 30,000 hours continuous, trouble free operation. Complete with fixings and anti-vibration support gasket. Wall or ceiling mounted installation. IPX4 splash proof protection

CA VO Centrifugal Inline Fans

workshops, offices, sports halls and canteens. ______________________

Technical Data For ventilation of pubs, restaurants, shops, workshops, offices, sports halls and canteens. ■ Seven models. ■ 2 speed motors (100/125/150). ■ Data and performances IMQ performance certified. ■ Complies with the CEI EN 60335- 2-80 standard. ■ Splash proof protection. ■ Complete with fixing bracket. Design: F. Trabucco and M. VecchiIP). _____________________ Awards Honourable mention, 1994 Golden Compass, Italy Wiring diagrams shown on page XXVII

Product Description In Line centrifugal extractor fans. Two speeds on 100, 125 & 150 models only. Self extinguishing VO plastic. Complete with fixing brackets. IPX4 splash proof protection on all models. Long Life ball bearing motors which are guaranteed for 30,000 hours continuous, trouble free operation. Cannot be used with flat ducting. All models can be speed controlled. Various colours and sizes of grilles available – see accessories section. IPX4 splash proof protection.

Polar M10 EA Air Conditioner

_____________________ All in one air conditioner for a recommended room size o.

Technical Data New generation all in one air conditioner with all the advantages of the electronic Polar range. High quality of construction, easy to use and to install. ■ The new design together with the    use of R410A cooling gas makes  this new product one of the leaders in its category for   performance and efficient use of energy and environmental respect. ■ Performance EER and yearly     consumption (according to EN     14511) are TÜV certified. ■ Safety is certified by TÜV GS. ■ The automatic water drainage     system collects the dampness     from the environment, evaporates     it and finally expells the vapour     through the hot air extraction duct. ■ The infrared remote control is     designed ergonomically and can     be used up to a maximum distance of 10 metres from the    unit. _______________________ Standard Accessories Washable anti-dust filter which traps the impurities present in the air drawn through the unit, preventing their circulation in the air-conditioned room. ■ Activated carbon filter. ■ Three washable anti-dust filters to protect the heat exchanger of the condensing unit. ■ All anti-dust filters are made of ABS thermoplastic resin.

Product Description   All in one air conditioner for a recommended room size of up to 60m3 Comes with infra red remote control unit The infrared remote control is designed ergonomically and can be used up to a maximum distance of 10 metres from the unit. High quality of construction, easy to use and to install. Three washable anti-dust filters to protect the heat exchanger of the condensing unit Washable anti dust filter which traps the impurities present in the air drawn through the unit, preventing the circulation in the air conditioned room. The automatic water drainage system collects the dampness from the environment, evaporates it and finally expels the vapour through the hot air extraction duct. The new design together with the use of R410A cooling gas makes this new product one of the leaders in its category for performance and efficient use of energy and environmental respect. An exhaust vent for expelling warm air through partly open doors and windows in included in the supply